Tait TB8100 Technical Support

Tait Confidential Tait Electronics Ltd
Telephone:+64-3-357-9991 TN-1013-AN
support@taitworld.com
http://support.taitworld.com Date of Print: 12/03/07 Page 6 of 9
5.3 Configuring the Channel Table
SK: Configure > Base Station > Channel Table
Configure the following
parameters.
1.
Set the Receive and Transmit frequencies.
2.
Name the channel.
3.
Set the receive CTCSS tone if used.
4.
Ensure the channel profile is set to Default. Set the Filter to Pre/De-
Emph Speech Band.
Note: If you are using the Advanced Profiles Software Feature Enabler, see
the TB8100 Service Kit User Manual.
Name the
channel.
Set Rx and Tx
frequencies.
Set required
Rx CTCSS
tone.
Do NOT set a
Tx CTCSS
tone.
Set Filter to
Pre/De-emph
Speech Band.
Set required power
and channel spacing.

Tait TB8100 Specifications

General

Brand	Tait
Model	TB8100
Category	Accessories
Language	English