Tait TM9100 Tune Up And Inspection

Tuneup Calibration basics 20
August 2004 © Tait Electronics Ltd
button by pressing the Space bar.
■ Mouse: select an option button by clicking on it.
Instruction boxes
An instruction box contains text that describes the steps for a calibration
task. After completing each step, select or click the Next> button to move
to the next step.
Radio Model toolbar
When you read a radio, the type of radio will be displayed on the radio
model toolbar. There are currently three types of radio available for
calibration, Standard, Trigger Base, and Mid Power.
The following are the main differences between the radio models:
■ Trigger Base radios use power levels approximately 6dB higher for each
of the three AGC (automatic gain control) test points, during the
Receiver test.
■ The target power levels for mid-power radios are higher than for other
models during the Tx Power Control test.
■ Mid-power radios use a lower current limit for each of the bias and
power tests.
2.3 Specifications form
You can use the Specifications form to view the Radio Model and Band. To
view the radio’s version and product code, select the Radio > Interrogate
menu command.
Before beginning the calibration tests:
1. From the forms tree, select Specifications.
2. Select the Radio > Read menu command.
Radio Model Displays the type of radio. This is a read-only field, and is set automatically
after reading the radio or opening a file, or manually using the Radio Model
toolbar.
Band Displays the frequency band in which the radio operates, as indicated by the
sixth and seventh characters in the product code. For example, TMAB1-
H600.

Tait TM9100 Specifications

General

Brand	Tait
Model	TM9100
Category	Radio
Language	English