EasyManuals Logo
Home>Tait>Two-Way Radio>TP9000 Series

Tait TP9000 Series User Manual

Tait TP9000 Series
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Battery Charging Guide 11
English
LED behavior
If there is a battery in the charger when power is supplied to the
charger, the LEDs behave as follows:
If the charger does not behave as expected:
Make sure the radio or battery is seated properly in the charger.
For the vehicle charger, see also
"Inserting the radio into the
vehicle charger"
.
Check that the charger is properly plugged into the originally
supplied power supply.
Check that the battery and charger contacts are clean. To clean,
wipe the contacts with a dry lint-free cloth to remove any dirt, oil
or grease.
Meaning
briefly
The charger has been connected to a power supply.
steady
The battery is charging.
steady
Charging complete. Remove the battery, or leave it in the
charger.
steady
The battery temperature is outside the normal
charging range. Charging will start or resume once
the temperature is within normal limits. No action is
required by you.
There is a fault. Contact your dealer.
or
flashing
If the LEDs for all charger slots continuously flash
orange, or red then orange, the charger itself may be
faulty (e.g. the 6-way charger fan may be jammed).
Contact your dealer.
all off
There is a fault. Contact your dealer.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tait TP9000 Series and is the answer not in the manual?

Tait TP9000 Series Specifications

General IconGeneral
BrandTait
ModelTP9000 Series
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals