Tait TP9000 Series User Manual

4 Battery Charging Guide
English
About the chargers
Unless otherwise indicated, the charging advice and instructions in
this document apply to all chargers.
The following chargers are available for your Tait radios and batteries:
Chargers for intrinsically safe (IS) and non-incendive (NI) batteries
contain circuitry for the protection of IS/NI batteries. These chargers
are marked with an IS circle logo
. IS/NI radios are also marked with
an IS circle logo .
IS/NI batteries are identified on their labels.
IS/NI batteries can only be charged in the chargers for IS/NI batteries.
However, all chargers can charge non-IS/NI batteries.
FM-approved batteries for use with the TP8100 can use any of these
chargers.
Part number range Designation
T03-00012-xxxx Desktop charger for
non-IS/NI batteries
T03-22011-Bxxx Desktop charger for
IS/NI batteries
T03-00013-xxxx 6-way charger for
non-IS/NI batteries
T03-22011-Cxxx 6-way charger for
IS/NI batteries
T03-00014-AAAA Battery-only vehicle
charger for non-IS/NI
batteries
T03-00014-BAAA Vehicle charger for
non-IS/NI batteries
T03-22011-Dxxx Vehicle charger for
IS/NI batteries

Tait TP9000 Series Specifications

General

Brand	Tait
Model	TP9000 Series
Category	Two-Way Radio
Language	English