Multifunction Filter
Vacuum up dust with a vacuum cleaner once
every two weeks. Do not wash.
1110
REPLACING THE MULTIFUNCTION FILTER
1
will display as a reminder
to change the Multifunction Filter.
2
Unplug the air purifier. Remove the old
Multifunction Filter and properly dispose of it.
Displayed
TIMER
AUTO SPEED ON/OFF
Filter Reset
3
Replace with a new one.
Install the filter and front cover back.
ON/OFF
4
Plug in and tap to turn on the air purifier.
TIMER
AUTO
5
Press and hold and
simultaneously
for 3 seconds to reset the filter.
Note:
Important: Always make sure the air
purifier is turned off and unplugged
before replacing the filter.
It is recommended to replace the
Multifunction Filter every 6 to 8 months
(depending on the frequency of use and
air quality).
CLEANING AND MAINTENANCE
Always make sure the air purifier is turned off and
unplugged before cleaning.
TIMER
AUTO SPEED ON/OFF
Filter Reset
Outer Surface
Wipe with a soft, dry cloth. If necessary,
wipe with a damp cloth, then immediately dry.
Note:
DO NOT stick any foreign objects or your fingers inside of the unit.
Never immerse the air purifier in water and never allow water to drip into the motor housing.
DO NOT clean with abrasive chemicals or flammable cleaning agents.
For storage, you may leave the unit covered to protect it from dust. Store it in a cool, dry location.
To Next Page
Loading...
Need help?
General
