8
before putting into service
Batteries
Safety measures when working with batteries:
• Never bring an open flame or a glowing objects into the vicinity of the battery,
as there is a danger of explosion from the electrolytic gas present in the cells!
No smoking!
• The battery must always be clean and dry. Do not place any metallic objects on
the battery.
• Beware of sulphuric acid! Caustic. Do not inhale. Avoid any contact with the
skin or eyes. Wear protective goggles when working on the battery.
• Observe the operating regulations of the battery manufacturer.
Charging procedure (traction block batteries with external charging
unit)
After completing the charging and with immediate use:
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t Fold the driver seat forward and open the battery cover.
t Disconnect the connection between the battery and the machine with the
battery disconnection socket.
Caution:
Battery compartment must be open during charging.
t Connect battery plug with the external battery charger.
t Switch off charger.
t Disconnect the charger plug.
t Connect the battery to the machine with the battery disconnection socket.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
Loading...
Need help?
General