78
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Notice:
The mains plug must be removed from the
mains supply socket during all mainte-
nance work.
Notice:
Store the machine with the suction nozzle
and cylindrical brush lifted up (parking po-
sition) and with open tank cover (fresh wa-
ter and recovery tank). Thus, the tank can
dry, and the generation of mold and un-
pleasant odors is prevented.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Signs and symbols:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ◊◊◊◊ = periodically
Activity
◊
◊◊
◊◊◊
◊◊◊◊
Page
Check the suction nozzle and remove
any dirt
●
Check the cylindrical brush and the
brush housing, and remove any dirt
●77
Clean the suction filter and the float ●
Clean the spray nozzles ● ● ● 77
Clean the machine with a moist cloth ● ● ●
Clean the solution tank filter (encapsu-
lation)
●77
Clean the solution tank filter (spray ex-
traction)
●77
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 250 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
To Next Page
Loading...
Need help?
General
