TBB Apollo Maxx 3.0S User Manual

Apollo Maxx User Manual
13
3. Installation and Wiring
Please refer to "Quick Installation Guide".
Keep away from the fire, avoid direct sunlight and rain; do not store
flammable, explosive or corrosive gases or liquids in the working
environment. Don't install in a working environment with the metal
conductive dust.
 Please install the equipment in a dry, clean and cool location with good ventilation.
 Operating temperature: -20～65℃
 Storage temperature: -40～70℃
 Cooling: Force fan
 Relative humidity in operation: 95% without condensation.
 Altitude: 2000m
3.1 Recommended DC cables
Please find the following minimum wire size. If the DC cable is longer than 5m, please increase
the cross section of the cable to reduce the loss.
Use a torque wrench with insulated box spanner in order to avoid
shorting the battery. Avoid shorting the battery cables.
Maximum torque: 12 Nm.
Model
Recommended cross section
φ8 aperture copper terminal
(Length<5m)
Apollo Maxx 2.0M
35mm²~50mm²
Apollo Maxx 2.0S
25mm²~50mm²
Apollo Maxx 3.0M
50mm²
Apollo Maxx 3.0S
25mm²~50mm²
Apollo Maxx 5.0S
50mm²

TBB Apollo Maxx 3.0S Specifications

General

Brand	TBB
Model	Apollo Maxx 3.0S
Category	Inverter
Language	English