Apollo Maxx User Manual
31
7. Specification
Input voltage range:175~265 VAC, Input frequency:45~65Hz
AC input Current (transfer switch)
Voltage: 220/230/240 VAC ± 2%, Frequency: 50/60 Hz ± 0.1%
Cont. output power at 25°C
Absorption charging voltage
AGM/ GEL/ OPzV/ Lead-Carbon/ Li-ion/ Flooded/ Traction/ TBB SUPER-L(48V series)
MPPT charger maximum efficiency
a) output short circuit, b) overload, c) battery voltage too high
d) battery voltage too low, e) temperature too high, f) input voltage out of range
<0ms(<15ms when WeakGrid Mode)
a) output short circuit, b) overload, c) battery voltage over voltage
d) battery voltage under voltage, e)over temperature, f) Fan block
g) input voltage out of range, h) input voltage ripple too high
CAN Bus communication port
For parallel and three phase operation, remote monitoring and system integration
General purpose com. Port
RS485 (GPRS, WLAN optional)
Operating temperature range
Storage temperature range
Relative humidity in operation
EN-IEC 62477-1, EN-IEC 62109-1, EN-IEC 62109-2
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-3-11, EN61000-3-12
To Next Page
Loading...
Need help?
General
