Connecting an AV receiver or digital sound bar
You can enjoy Dolby Audio™ multichannel sound from your TV if you connect a digital
amplifier or sound bar (not provided) in either of two ways:
• Digital optical audio out (S/PDIF) – Connect a TOSLINK optical cable (not
provided) from the TV to the Optical input on your receiver or sound bar.
• HDMI
®
ARC – Connect an HDMI
®
cable (not provided) from the HDMI (ARC)
connector to the HDMI
®
input on your receiver or sound bar. This connection
uses the Audio Return Channel (ARC) feature of the HDMI
®
specification to
output sound from the TV to a compatible device. To use this feature, you
must configure the TV to enable HDMI
®
ARC, as explained in Enable HDMI
®
ARC.
Preparing for Internet connectivity
If you want to watch streaming content and take advantage of the cool features of
your TCL Roku TV, connect it to the Internet through a wireless modem/router or a
wireless access point (not provided). The TV has a built-in wireless LAN adapter.
Note:
The TV supports only its internal wireless network adapter—it does not support
the use of a USB network adapter.
To Next Page
Loading...
Need help?
General
