TCL 55C635 User Manual

4
Chapter 2 Connections and Setup
Initial Setup
The rst time you switch the set on, the
Welcome
wizard appears, which guides you through the initial setup process.
Follow the on-screen instructions to nish the initial setup process such as selecting the language, pairing your
remote, connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a
step, you can perform the setup later from the settings menu.
Notes:
- It’s recommended to select
Set up Google TV
and nish its setup to enjoy more features during the initial setup process.
If you have nished basic TV’s setup, you can reaccess Google TV by pressing on the remote control, selecting
(Settings) > Set up Google TV
and pressing
OK
to conrm.
- When you pair your remote, keep the remote control and TV within 1 meter, and follow the on-screen guide for
pairing. After nishing pairing the remote, you can use the Google Assistant button. If you skip remote pairing, you
will be prompted to pair the remote with the TV again when you use the Google Assistant button for the rst time.
TV Buttons
-
Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one button. It may work just as Standby/Quit standby button, or as a multi-function
controller.
You can turn on the TV by pressing the button on the TV set.
While the TV is on, press the button to display the multi-function menu. For more information about how to use
the multi-function menu, please refer to the figure below.
• Press to move the highlight to the next function selection
• Press and hold the button for more than 2 seconds to conrm your selection.
Note:
You can follow the on-screen guide to operate. Figures and illustrations are provided for reference only and may
vary depending on the model.
-
MIC switch
The MIC button is located next to the power button. If you want to use the feature of hands-free TV voice control,
turn on this switch.
CH+ CH- Volume+
Source OKVolume-
Standby
Tips: Short click to change, long click to select.

TCL 55C635 Specifications

General

Screen shape	Flat
Response time	15 ms
Display diagonal	55 \
Display brightness	- cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	50 Hz
Display diagonal (metric)	138.8 cm
Motion interpolation technology	-
RF connector type	F, IEC
RF ports quantity	2
HDMI ports quantity	3
Common interface (CI)	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Game features	Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR)
USB recording	No
Processor cores	4
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Product color	Black
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Audio decoders	Dolby Atmos, DTS-HD
RMS rated power	30 W
App distribution platform	Google Play
Operating system installed	Google TV
AC input voltage	220 - 240 V
Energy efficiency scale	A to G
Power consumption (standby)	0.29 W
Power consumption (typical)	- W
Package type	Box
Package depth	133 mm
Package width	1396 mm
Package height	857 mm
Package weight	16000 g
Tuner type	Analog
Analog signal format system	NTSC, PAL, SECAM
Repairability index	6.9

Weight and Dimensions

Depth (with stand)	292 mm
Width (with stand)	1227 mm
Height (with stand)	765 mm
Weight (with stand)	12200 g
Depth (without stand)	81 mm
Width (without stand)	1112 mm
Height (without stand)	711 mm
Weight (without stand)	12000 g