TCL 55C635 User Manual

9
Connections and Setup
Switching On
Follow the instructions on this page on how to switch on your TV set and
the remote control before going on to following pages describing how to
use the channel set-up procedure.
1. Insert two AAA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specied.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine, re or
the like, throw them in a re, recharge them or try to open them, as
this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it
for a long period of time.
- Attention should be drawn to the environmental aspects of battery
disposal.
2. Connect the power cable FIRST to the television, THEN to a mains
socket. (
Note:
If the power cable is connected to the television, please
only connect the power cable to the mains socket.
)
Your TV set should only be connected to an AC supply. It must not be
connected to a DC supply. If the plug is detached from the cable, do
not, under any circumstances, connect it to a mains socket, as there is
a risk of electric shock.
Note:
The gures are for representation only, the location of power
socket of the television might dier depending on the model.
3. Connect an outside aerial to the
ANTENNA IN
socket at the back of
the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
connecting an external aerial or other equipment tted.
4. When powered on, the TV will be turned on directly or be in standby
mode.
If the power indicator lights up, the TV set is in standby mode. Press
the button on the remote control or on the TV set to turn on the TV.
Switching O󰀨
To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low energy
consumption.
To switch o󰀨 the TV set, unplug the mains socket from the mains
outlet.

TCL 55C635 Specifications

General

Screen shape	Flat
Response time	15 ms
Display diagonal	55 \
Display brightness	- cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	50 Hz
Display diagonal (metric)	138.8 cm
Motion interpolation technology	-
RF connector type	F, IEC
RF ports quantity	2
HDMI ports quantity	3
Common interface (CI)	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Game features	Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR)
USB recording	No
Processor cores	4
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Product color	Black
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Audio decoders	Dolby Atmos, DTS-HD
RMS rated power	30 W
App distribution platform	Google Play
Operating system installed	Google TV
AC input voltage	220 - 240 V
Energy efficiency scale	A to G
Power consumption (standby)	0.29 W
Power consumption (typical)	- W
Package type	Box
Package depth	133 mm
Package width	1396 mm
Package height	857 mm
Package weight	16000 g
Tuner type	Analog
Analog signal format system	NTSC, PAL, SECAM
Repairability index	6.9

Weight and Dimensions

Depth (with stand)	292 mm
Width (with stand)	1227 mm
Height (with stand)	765 mm
Weight (with stand)	12200 g
Depth (without stand)	81 mm
Width (without stand)	1112 mm
Height (without stand)	711 mm
Weight (without stand)	12000 g