14
Using More of Your TV
2.
Press
Up/Down
to select the desired item and press
OK
to enter the corresponding submenu.
3. Press
to return to the previous menu.
4.
For the rst time, activate
the screen mirroring
function on your iPhone, iPad, or Mac and choose
the TV’s name you want to connect in the searching
list.
5.
If an AirPlay passcode appears on your TV screen,
enter the passcode on your iOS or iPadOS device.
6.
To stop mirroring your iOS or iPadOS device, open
Control Center, tap screen mirroring, then tap stop
mirroring.
Notes
:
-
If your WiFi is turned o, press
on the remote
control, select
(Settings) > Network & Internet >
Wi-Fi
, and press
OK
to turn it on.
-
To disable the feature, select
(Settings) > System
> AirPlay and HomeKit Settings > Apple AirPlay
and HomeKit >
AirPlay
and press
OK
to turn it o.
- Apple, AirPlay and HomeKit are trademarks of Apple
Inc., registered in the U.S. and other countries.
-
This Smart TV Pro is compatible with AirPlay 2 and
HomeKit. iOS 12.3 or later or macOS 10.14.5 or
later is required.
4.
For the rst time, depending on dierent types of
phones, there are two situations: 1) an invitation
prompt appears, select "
Accept
" and press
OK
to
connect. 2) enter a correct PIN code to connect as
per the PIN message on the phone.
5.
Press the option button to choose the audio source.
6. To exit the multi visual function, press
to display a
dialog box, then select
OK
and press
OK
to conrm.
Notes
:
-
This feature is not available in any of the cases
below:
a) when TV is in HbbTV, Netlx or Media Player.
b) if the video from phone/DTV is scrambled.
c) when the capacity of required video decoding
exceeds 4K 60Hz.
-
When in full screen mode, due to the compatibility
of the third party’s Apps, there might occur failure to
return to the dual views.
-
Multiple phones can be used. When in dual view
mode, use Left/Right to move the focus to TV view
and then cast another phone to the TV.
-
To check all available history list, select
(Settings)
> System > Multi Visual Settings > Connection
List
and press
OK
to enter.
Works with Alexa
To use the Works with Alexa function, you will need a
device like an Amazon Echo or Amazon Echo Dot (Sold
Separately). Set up your Amazon device. Then, on your
TV go to the Homepage Menu, select
Your apps
, and
add “
Works with Alexa
”. Then follow the on screen
prompts. Please note that within the Alexa app on your
phone, you will need to enable the TCL Assistant Skill,
through the Alexa Skills Menu.
Apple AirPlay and HomeKit
Wirelessly share content with your TV using AirPlay and
control your TV using the Home app on your iPhone,
iPad, or Mac. You can set up AirPlay and HomeKit at any
time in Settings menu.
The function is enabled by default. To use the function,
make sure your iPhone, iPad, or Mac is iOS or iPadOS
device and the WiFi on the iOS or iPadOS device is
turned on. Then follow the steps below to operate.
1.
Press
on the remote control, select
(Settings) >
System > AirPlay and HomeKit Settings
>
Apple
AirPlay and HomeKit
and press
OK
to enter, or
press or
(if available) on the remote control,
then select
AirPlay > AirPlay and HomeKit
Settings
and press
OK
to enter.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
