EN
14
English
Using more of your TV
-
This function may not be available for certain
models.
-
This feature is only available in Google TV mode.
Reset to factory default settings
Allows you to reset the TV to factory default settings.
1.
Press on the remote control, select
Settings
> System > About > Reset > Factory reset
and
press
OK
to enter.
2.
Select the
Factory reset
option and press
OK
to
enter. Then select
Erase everything
and press
OK
to confirm.
3.
Enter the password you have set or the PIN
according to the on-screen prompt.
4.
Select
OK
and press
OK
to conrm.
5.
The
Welcome
screen appears. Follow the
instructions in the section
Initial setup
.
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
the Google website rst. Then follow the steps below
to access.
1.
Turn the built-in MIC switch (Please refer to the
Quick Start Guide to nd the MIC switch on your
TV set) to on before using this function.
2.
In Google TV mode, Press on the remote
control.
3.
Select "Yes, I'm in".
4.
Say "OK Google" or "Hey Google" to activate it.
Notes:
-
This hands-free TV voice control is only available
for selected models. For details, please refer to
your local dealer.
-
A quiet surrounding is required for better function
when using it. The recommended distance for
using the hands-free TV voice control is within 2
meters in front of it.
-
Turn the built-in MIC switch to o if you are not
going to use it.
-
The availability of hands-free TV voice control
depends on your region/country/language.
-
Turn on both
Quick start
and
Screenless
service
in the
Settings > System > Power and
energy
menu to enjoy hands-free voice control
in TV standby mode.
-
Standby power consumption will increase
because the built-in MIC is always listening when
the Google Assistant or voice control with the
built-in MIC is enabled.
-
This feature is only available in Google TV mode.
Apple AirPlay and HomeKit
(* Available according to the software version)
Wirelessly share content with your TV using AirPlay
and control your TV using the Home app on your
iPhone, iPad, or Mac. You can set up AirPlay and
HomeKit at any time in Settings menu.
The function is enabled by default. To use the
function, make sure your iPhone, iPad, or Mac is iOS
or iPadOS device and the WiFi on the iOS or iPadOS
device is turned on. Then follow the steps below to
operate.
1.
Press on the remote control, select
Settings
> System > AirPlay and HomeKit Settings >
Apple AirPlay and HomeKit
and press
OK
to
enter, or press (if available) on the remote
control, then select
AirPlay > AirPlay and
HomeKit Settings
and press
OK
to enter.
2.
Press
/
to select the desired item and press
OK
to enter the corresponding submenu.
3.
Press to return to the previous menu.
4.
For the rst time, activate the screen mirroring
function on your iPhone, iPad, or Mac and
choose the TV’s name you want to connect in the
searching list.
5.
If an AirPlay passcode appears on your TV screen,
enter the passcode on your iOS or iPadOS device.
6.
To stop mirroring your iOS or iPadOS device, open
Control Center, tap screen mirroring, then tap stop
mirroring.
Notes:
-
If your WiFi is turned o, press on the remote
control, select
Settings >
Network and Internet
> Wi-Fi
,
and press
OK
to turn it on.
-
To disable the feature, select
Settings > System
> AirPlay and HomeKit Settings > Apple
AirPlay and HomeKit > AirPlay
and press
OK
to turn it o.
-
Apple, AirPlay, HomeKit and Siri are trademarks
of Apple Inc., registered in the U.S. and other
countries and regions.
-
To use AirPlay and HomeKit with this Smart
TV Pro, the latest version of iOS, iPadOS, or
macOS is recommended.
Blue Light Filter
(* not available for some models)
It reduces the amount of blue light emitted by
the screen, which can reduce the visual fatigue
associated with screen viewing.
1.
Press on the remote control to display the
dashboard, select
Picture > Advanced settings
>
Colour
and press
OK/
to enter.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
