29
Listen to music from your Bluetooth
device
1
Make sure that your device supports Bluetooth Audio.
The Sound Bar can support the following Bluetooth
profiles: A2DP and/or AVRCP. For information, check
the specification of your device.
2
Pair your Bluetooth device with the Sound Bar (see
‘Connect the Sound Bar with your Bluetooth device’
on page 24).
3
Start listening to music stored in your Bluetooth device
through the Sound Bar.
• If your Bluetooth device supports A2DP, you can
listen to music, but you cannot control the playback.
• If your Bluetooth device supports AVRCP, you can
listen to music and control music playback with the
remote control. Press
to pause or resume music
playback. Press to skip to the previous/next
track.
Note
The operational range between the Sound Bar and your
Bluetooth device is approximately 10 meters (without any
obstacle between the Bluetooth device and Sound Bar).
To Next Page
Loading...
Need help?
General
