18
signals in most devices. For more information of how to
activate the PCM signal output, check the user manual of
your TV or device.
Direction for setting up your Sound Bar
using an optical cable
Do not bend or kink the optical cable (SPDIF) as it
is fragile and can easily get damaged and broken.
To get the best possible audio experience using the optical
cable:
1 Press the Home button on your TCL TV Remote.
2 Navigate to Audio option under Settings.
3 Uncheck the “TV speaker enabled” option.
4 Under S/PDIF and ARC, select PCM-Stereo.
Notes
• Different devices may have different menu options.
• Devices such as Blu-ray players, set-top boxes, etc. are
also applicable.
Connect with USB disk
To Next Page
Loading...
Need help?
General
