20
with voice prompts and white light fast flash.
1. Put the phone within 9.8' in distance;
2. Activate the Bluetooth function of the phone, so that the
phone starts to search for the Bluetooth device (please
refer to the phone instructions for details);
3. Select "TCL S522W" from the device that has been
searched for, click connection, with voice prompt;
4. If the phone remind you to enter password, enter “0000”
and press confirm button to match sound bar to the
phone;
5. Press the back button of the phone to exit the phone
menu. Make sure the distance between sound bar and
phone is within 32.8' and there is no obstacles. At this
time, music can be played on the sound bar;
6. Short press " " to play and pause music. Short press "
" or " " button to previous or next song;
7. To disconnect, short press or long press the " " button
on the sound bar, At this time, another mobile phone
device can be used to connect Bluetooth playing; If
the connection is not selected, the machine will be on
waiting for connection status.
z
AUX Mode
After power on, connect the external audio sources to the
AUX jack of sound bar by using the 3.5mm audio cable, and
then Press the " " button on the sound bar or the "AUX"
button on the remote control to switch to "AUX" mode. At this
time, music from the external audio sources such as MP3/CD
can be played. (please adjust the volume of the external audio
sources accordingly at a comfortable level.)
To Next Page
Loading...
Need help?
General
