7
Network Settings
After you connect your home network to the TV, follow the steps below to congure the network settings of your TV.
Note: the wireless network connect won't work if your TV is already connected to a wired network.
Connecting to a wireless network
1. Press
on the remote control.
2. Press ▲/▼ to select Network and press OK/► to enter.
3. Select Wireless connection and press OK/►to enter. Press OK/►, and press▲/▼ to set On or Off.
4. Set Wi-Fi to On. All available wireless networks will be displayed.
5. Press ▲/▼ to highlight the name of your wireless network and press OK.
6. Using the on-screen keyboard and the remote, enter your network's password, then highlight Enter on the on-
screen keyboard and press OK. Once connected, the wireless network will be saved. Next time when you
connect to the same network, you do not have to re-enter the password.
7. Press
to close the menu and return to the homepage.
Connecting to a wired network
1. From the Network menu, select Wired settings and press OK/► to enter.
2. The screen displays network configuration information.
3. Press OK/►to enter IP settings to set configuration manually.
4. Press
to close the menu and return to the homepage.
Detecting your network status
1. From the Network menu, select Connecting test and press OK to enter.
2. The screen displays “The network connection test is successful“ or “The network connection test failed“.
Getting Started
To Next Page
Loading...
Need help?
General
