TCL LINKZONE MW42V User Manual

11
NOTE
When the SIM PIN code is entered incorrectly 3 times, a PUK code is required.
You can obtain the PUK code from your internet service provider.
Connection Mode
Configure whether your LINKZONE is connected to network automatically or manually.
Network Mode
Configure network selection method, and change the network mode.
Make sure you click Apply after making desired changes.
Advanced Settings
Check the IP address, and manage DHCP and MAC settings on this tab.
With DHCP Server enabled, the IP addresses you have defined will be assigned to the
connected devices automatically.
Regarding MAC Filter feature, you can specify which device can or cannot access the
internet.
About
Check more device information (e.g. software version, device name, and IMEI), and perform
other basic settings on this tab.
Reboot
If the LINKZONE does not work properly, you can try restarting the
LINKZONE to solve the problem.
NOTE To restart the LINKZONE, you can also press the power
button for 10 seconds.
Reset
If you can't access the internet for unknown reasons, or forget the
login password, you can factory reset the LINKZONE.
NOTE To reset the LINKZONE, you can also simultaneously press
the power button and WPS button for 3 seconds.
Backup Click to download the current configuration file to your local device.
Restore
Restore the device to a previous configuration by importing the
backup configuration file.
4.5 More
Make a WPS connection, and check for firmware update in this panel.

TCL LINKZONE MW42V Specifications

General

Brand	TCL
Model	LINKZONE MW42V
Category	Network Router
Language	English