29
7. Touch the switch to enable/disable scheduled power on/o.
Time zone
In the me zone menu you can set your me zone, enable/disable automac date & me and
set 12-hour/24-hour format.
Language
The language set for the Family watch will follow the language of the administrator’s TCL
Connect app by default. English is set by default.
Firmware update
You can update your watch rmware or the TCL Connect app version by following these
steps:
1. Touch More on the applicaon main screen.
2. Select a Family watch.
3. Touch Firmware update.
4. Touch Download.
Note: Using mobile data to download updates may incur signicant data charges. Your watch
will restart automacally aer updang.
Unpair the watch
To unpair your watch follow the steps below:
1. Touch More on the applicaon main screen.
2. Select a Family watch.
3. Scroll down and touch Unpair.
4. Touch Unpair again in the pop-up dialog.
Locaon mode
Automac mode: The device sets the tracking period and the locaon technology automacally.
The faster the device is moved the more oen the posion is transmied; in outdoor areas
the device uses GPS, in indoor areas the device uses the surrounding WiFi hot spots and the
mobile network to determine its posion.
Low power mode: The locaon is transmied only when clicking the locaon icon .
FAQ
Touch to read the FAQ rst if you have queries about using your watch. It may the fastest way
to solve your problem.
User manual
This manual details how to use your watch and the TCL Connect app.
To Next Page
Loading...
Need help?
General
