Guided Setup
With the preliminaries out of the way, it’s time to turn on your TV. As the TV starts for
the first time, it leads you through Guided Setup, which configures the TV before you
start to use it.
During Guided Setup, you’ll:
• Answer a few questions
• Provide network connection information
• Get a software update
• Link your TV to your Roku account.
• Connect devices such as a DVD player, game console, or cable box.
Starting Guided Setup
To start Guided Setup, press the POWER button on the remote control to turn on
your TV.
Note:
Guided Setup normally runs only once, the first time you turn on your TV. If you
need to run Guided Setup again, you’ll have to perform a factory reset, as explained in
Factory reset everything.
When you first turn on your TV, it will take a few seconds to get itself ready. You’ll
notice the following things happening:
1. The status light blinks every time the TV is busy doing something; in this case
it’s powering up and getting ready for you.
2. The power-on screen appears and the status light blinks slowly for a few more
seconds. The power-on screen shows a brand logo while the TV starts up.
3. After a few seconds, Guided Setup starts.
To Next Page
Loading...
Need help?
General
