TCL TAW06CR19 User Manual

8 9
3. Install the support brackets (with sill angle brackets attached) to the bottom of the cabinet as
shown below.
4. Tighten all 6 bolts securely.
Mark
Left
Right
Locknut
Sill Angle
Bracket
5/8” Long Flat Head Bolt
1/2” Long Flat Head
Bolt and Locknut
(2) required
for each support bracket
Step 6: Extend the Accordion Panels
1. Carefully raise the window to expose the accordion panel and panel frame. Loosen the
locking screws so the accordion panels slide easily.
2. Extend each panel to completely fill the width of the window. Tighten the locking screws
when the panels are fully extended.
Sash Lock
Window Sash Seal
5/8” Long
Hex-Head Screw
5/8” Long
Hex-Head Screw
1/2” Long
Hex-Head Screw
Step 7: Install the Window Lock and Sash Seal
1. Trim the sash seal to fit the width of the window. Insert the sash seal into the space between
the upper and lower sashes.
Sash Lock
Window Sash Seal
5/8” Long
Hex-Head Screw
5/8” Long
Hex-Head Screw
1/2” Long
Hex-Head Screw

TCL TAW06CR19 Specifications

General

Brand	TCL
Model	TAW06CR19
Category	Air Conditioner
Language	English