39
Note: After powering on your Soundbar, if there is no
operation performed on either the Soundbar or
remote control within 10 seconds, all LED indicators
on the Soundbar will turn off and light up again when
the operation is resumed.
Tip: You can use more advanced functions on the remote
control (see ‘Overview of the remote control’ on page
20).
Listen to music from your Bluetooth
device
1 Make sure that your device supports A2DP and/or
AVRCP. For information, check the specication of your
device.
2 Pair your Bluetooth device with the Soundbar (see
‘Connect the Soundbar with your Bluetooth device’ on
page 29).
3 Start listening to music stored in your Bluetooth device
through the Soundbar.
• If your Bluetooth device supports A2DP, you can
listen to music, but you cannot control the playback.
• If your Bluetooth device supports AVRCP, you can
listen to music and control music playback with the
remote control. Press the center button to pause or
resume music playback. Press left/right to skip to
the previous/next track.
Note
• The operational range between the Soundbar and your
Bluetooth device is approximately 10 meters (without
any obstacle between the Bluetooth device and
Soundbar).
To Next Page
Loading...
Need help?
General
