Preparation
12
1
In the power-off state, press and hold [Í/l] for at least 7 seconds until the LED
indicator lights alternately in blue and red.
• Wait about 5 seconds after you turn off the power of the unit.
• The LED indicator lights (Red/blue) to indicate that the unit is in pairing mode.
2
Perform steps 2 and 3 of “Pairing procedure - When pairing your headphones first time
with a Bluetooth
®
device”. (l 11)
• When the LED indicator (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.
(Connection established)
Note
• You can pair a maximum of 10 Bluetooth
®
devices with this unit. When you pair a device after the maximum has been
exceeded, previous devices are overwritten. To use overwritten devices again, do the pairing again.
• It is easier to pair if you disable the Bluetooth
®
function of the first device when pairing with a device after the first.
• If the connection with the device does not complete within 5 minutes, the pairing mode on this unit cancels and they
transition to connection standby mode. Perform pairing again.
• This unit remembers the device lastly connected. The unit may connect automatically after turning on the power of
this unit.
Connecting 2nd Bluetooth
®
device
To Next Page
Loading...
Need help?
General
Weight and Dimensions
