Operation
15
Listening to music
If the Bluetooth
®
compatible device supports the “A2DP” and “AVRCP” Bluetooth
®
profiles, music can be
played back with remote control operations on the unit.
• A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.
• AVRCP (Audio/Video Remote Control Profile): Allows remote control of the device using the unit.
1
Connect the Bluetooth
®
device and the unit. (l 13, “Connecting a Bluetooth
®
device”)
2
Select and play the music or the video on the Bluetooth
®
device.
• The unit's headphones will output the music or the audio of the video being played back.
• Operating time may become shorter depending on the usage conditions.
∫ Attention
• The unit might leak sound depending on the volume level.
• When the volume is increased to near maximum level, music may sound distorted. Decrease the volume until the
distortion is cleared.
Note
• Playback will pause when you take off this unit. Even after you take off the headphones, music playback will resume if
you put it on again within 60 seconds.
To Next Page
Loading...
Need help?
General
