Technics SC-C50 User Manual

14
Network settings (Continued)
(14)
Basic
2 Press [ ] to exit the setting.
Note
• Depending on a router, other connected
devices may temporarily lose their connection.
• For details, refer to the operating instructions
of the wireless router.
■
Using the “Google Home” app
“Wi-Fi Setup”
(When using the Chromecast-enabled apps with
this unit)
You can set up a connection using the “Google
Home” app.
1 Start the app and follow the on-
screen instructions.
2 Press [
] to exit the setting.
Note
• This unit will be displayed as “Technics-
SC-C50-
****
(Technics-SC-C30-
****
)” if the
device name is not set. (“
****
” stands for
characters unique to each set.)
• You can check your network information (SSID,
MAC address and IP address) from the “Google
Home” app or “Technics Audio Center” app.
• Some items on the “Google Home” app are
irrelevant to this unit.
To use Chromecast-enabled apps
When using the Chromecast-enabled apps to
play music on this unit, you need to set up a
network connection using “Google Home” app.
When the network has been set up with another
method, try the setting again with the following
procedure.
1 Press and hold [ ] on the top and
[•DIMMER / -INFO] on the rear of this
unit.
• The displayed connection method is
switched every 5 seconds.
2 When “Wi-Fi Setup” is displayed,
release [
] and [•DIMMER / -INFO].
• “Wi-Fi Setup” starts blinking.
3 Proceed to “Using the “Google
Home” app”.

Technics SC-C50 Specifications

General

Brand	Technics
Model	SC-C50
Category	Speakers
Language	English