Name: Technics SC-C70MK2
Brand: Technics
Rating: 4 (1 reviews)

To Next Page

To Previous Page

(Continued)

Network

Cannot connect to the network.

• Confirm the network connection and settings.

(⇒ 28)

• If the network is set to be invisible, make the

network visible while you set up the network for

this unit or make a wired LAN connection.

• This system’s Wi-Fi security supports WPA2™.

Your wireless router must therefore be WPA2™

compatible. For details on the security supported

by your router and how to change the settings,

please refer to the operating instructions or

contact your internet service provider.

• Make sure that the multicast function on the

wireless router is enabled.

• The wireless LAN environment or radio

interference in your area may cause connection

problem. In this case, try another connection

method. If the problem persists, make a wired

LAN connection. (⇒ 30)

• While the AC power supply cord is disconnected,

the LAN cable must be connected or

disconnected.

Cannot select this system as the output

speakers.

• Make sure that the devices are connected to the

same network as this unit.

• Reconnect the devices to the network.

• Turn the wireless router off and then on.

• Turn this unit to standby and on, and then select

this system as the output speakers again.

Other manuals for Technics SC-C70MK2

Questions and Answers:

Need help?

Do you have a question about the Technics SC-C70MK2 and is the answer not in the manual?

General