Technics SC-DV250 User Manual

Repeat function
Refer to i!lustrations BJ and Ej on page 19 of the illustrated booklet.
cD
Preparation: Press [DVD] to select “DVD” as the source.
D| Repeating chapters, titles and tracks
Press [REPEAT] during play.
DVD
The display on the television changes each time you press the button:
@) C: — Current chapter is repeated.
@> T: Current title is repeated.
) OFF: Repeat mode is canceled.
Video CD, CD
“@)"is displayed on the tuner/amplifier: Alt tracks on the diso(s) are
repeated.
"a> "is cleared: Repeat mode is canceled.
For your reference:
Use the PLAY MODE function if you want to listen to all discs (Video CD/
CD) repeatedly (™ page 12 “ALL-DISC play").
To cancel repeat play
Press [REPEAT] to clear “ @>” on the tuner/amplifier,
Repeat play does not work if the play time for the disc is not displayed on
the tuner/amplifier.
To repeat only your favorite tracks (Video CD/CD only)
@ Program the tracks you want (= right}.
@® Press [D>]. Play will start.
@® Press [REPEAT] to display “>”.
| Repeating a specific section (A-B REPEAT)
1° Press [A-B REPEAT] during play at the starting
point (A).
2 Press [A-B REPEAT] at the finishing point (B).
To cancel A-B repeat play
Press [A-B REPEAT] to clear “ @>” on the tuner/amplifier.
This feature cannot be used if the play time for the DVD is not displayed
on the tuner/amplifier.
The end of a track or title is automatically determined as point B when the
end of the title/track is reached.
Subtitles may not appear arround A and B (DVD only).
Program play
Refer to illustration EJ on page 20 of the illustrated booklet.
ise (Cd)
Remote control only
You can select up to 24 tracks on any of the loaded Video CDs or CDs to
play in the order you choose.
Preparation:
Press [DVD] to select “DVD” as the source.
Ensure a Video CD or CD is in the play position tray. (Program play is not
possible if the play position tray contains a DVD or is empty.)
1 While stopped
Press [PLAY MODE} to display “PRGM” on the
tuner/ampiifier.
Each time you press the button:
PRGM—RANDOM->ALL DISC—(off)
ee ae eRe |
Press [DISC] and (within 10 seconds) [1]-[5] to
select the disc.
Select the track with the numbered buttons.
For tracks numbered 10 and over, press [2 10/+/+] then the two digits,
Tho tuner/amplifier shows the disc number, track number and pro-
grammed order,
Repeat steps 2 and 3 to program the tracks in the required order.
4 Press [>].
All the tracks are played in the selected order.
To exit program mode
Press [PLAY MODE] while in the stop mode to clear “PRGM" on the tuner/
amplifier.
Program contents will ba saved in the memory.
You can do the following while the disc Is stopped in pro-
gram mode
Press [@] ta cancel the resume function (= page 8) if itis on.
@Checking program contents
Each time you press [SKIP (I< or ®P1)), the disc number, track number
and program order are displayed.
Adding to the program
Repeat steps 2 and 3,
Canceling a particular track
Select the track with [SKIP (44 or Pl)] then press (SHIFT]+
[CANCEL].
Canceling all tracks
Hold [Ml] for 3 seconds,
Hf “FULL” is displayed
24 tracks have been programmed. No further tracks can be programmed.
Discs and tracks the unit cannot find can be programmed but are skipped
during play. This is also the case if you program a DVD.
®You can program individual tracks even if the disc is a Video CD with
PBC.
Skipping is done in the programmed order.
You can search only within a track being played.
You cannot start play by pressing [DISC, 1-5] on the main unit while in
the program mode.
Basic operations a
ROTSS48
~ ary

Technics SC-DV250 Specifications

General

Brand	Technics
Model	SC-DV250
Category	Stereo System
Language	English