22
6.4. Disassembly of T/T Rubber Mat
and Turntable Ass’y
Step 1 Remove T/T Rubber Mat and Turntable Ass’y as arrow
shown.
Note:
• The Tone Arm Unit should be supported by Arm Rest.
• Take care not to stick the dust or iron powder to the
magnet attached to back inner side of turntable.
6.5. Disassembly of Insulator Unit
• Refer to “Disassembly of T/T Rubber Mat and Turntable
Ass’y”.
Step 1 Place the Dust Cover Unit on Cloth.
Step 2 Flip Cabinet Ass’y and put it on Cushion to prevent
scratch.
Step 3 Turn the 4 Insulator Unit in the direction of arrow and
remove them.
6.6. Disassembly of Bottom Chas-
sis Ass’y
• Refer to “Disassembly of T/T Rubber Mat and Turntable
Ass’y”.
• Refer to “Disassembly of Insulator Unit”.
Step 1 Remove 14 screws.
Step 2 Remove Bottom Chassis Ass’y as arrow shown.
To Next Page
Loading...
Need help?
General