Before
use
Caution:
•Never
connect the AC power
plug
before assembly has been
completed.
•Attach the dust cover
last,
so
that
assembly
and
adjustments can
be made most conveniently.
Checklist
of parts
Turntable
unit
1
Turntable platter 1
Turntable mat 1
45-rpm adaptor 1
Main
unit
fixing screw 4
Ground wire
(GND)
1
Installation diagram 1
Installation of the ground wire (GND) to the GND
terminal.
(See
Fig.
i.)
Building
your own
base
or cabinet for this model
SP-15
with
a large starting
torque
of 3 kg cm (2.61 Ibin) has the
superior feature of reaching constant speed in 0.4 second (at 33-1/3
rpm.).
For
this reason we recommend that you use durable and heavy
material.
The
thickness of the base should be more than 3 cm
(1
-11/64
inch).
Also
use durable and stable insulators
(tegs).
We
recommend that you purchase the
optional
turntable base
Technics
SH-15B1
as the cabinet
exclusively
for the
SP-15.
fS«e
Fig.
2.)
Assembly
and set-up
Caution:
Use care not to damage the
cord
and
bushing
when
setting
up
or
instating
into a
supporting
enclosure.
Assembling is explained based on the optiona
SH-1581
for reference in
cases
where the
unit
is
cabinet.
SH-15B1
is provided
with
screw holes (4
places)
for
1.
Install
SPr15,
with
the screw holes aligned
2.
Securely
hold
at 4 places by the
screws
supplied
with
SH-1581
Fig.
4.)
Fig.
4
AC
power cord
Ground wire
(<
3.
Pull out the power cord and ground wire (GND)
from
under
turntable
base.
4.
After the
above,
install the turntable platter and turntable mat.
Drill and cut out the
base
according
to the
installation diagram
The
installation diagram is drawn in
1
/1
actual
size.
As
paper has a tendency to stretch we suggest (hat you check the
diagram before using it as a template. Also chock dimensions for
printing
errors. Check the tonearm
mounting
position for proper
alignment (follow the tonearm manufacturer's specifications).
Also
make sure to allow sufficient clearance for power connector and
output
terminals of the tonearm.
To Next Page
Loading...
Need help?
Power
Turntable Specifications
Performance
Weight and Dimensions
