Technics SU-A900 User Manual

Remote Control Operation
'This remote control transmitter can be used to operate
Technics CD players and tape decks which are equipped with
remote control terminals or remote control sensors, or to
operate Technics tuners which are equipped with remote con¬
trol sensors. Consult your dealer for details.
>For detailed information concerning operation steps, etc.,
please refer to the appropriate page for each unit and the
respective operating instructions.
> Make sure that the power of each unit is set to the “ON” posi¬
tion before beginning the operations.
NOTE:
Face this remote control transmitter toward the main unit to
operate the main unit or other units which are connected to
the main unit by means of a remote control cable {See page
5).
To operate any other unit, face this remote control transmitter
toward that unit.
To operate the amplifier
To select an Input source
AIJX CO TUNER PHONO
o o o o
TAPE 1 TAPE 2
o o
To adjust the volume level
VOLUME +
To operate the tuner
To select the desired channel sequentlaly
N/ A
preset Q O
Select the desired
preset channel.
To select the desired channel directly
12 3 4
JL * a * Specify the preset channel
O O O O uslnjg the numeric buttons).
S 6 7 8
Q ^ O O O O Channel 12 '
^ Vw/ ^ i»0 ’ 2
6 6 S ig-o-o.
Note:
When you want to select further channels, you do not have to press the "TUNER” button
again.
Q*0»0
To select the desired band
tuner otsc/BANo The band changes
each time the
^ button is pressed.
When you want to change the band, you do not have to press the "TUNER” button again.

Technics SU-A900 Specifications

General

Brand	Technics
Model	SU-A900
Category	Amplifier
Language	English