Technics SU-A900 User Manual

Connect to a second tape deck (Tape deck 2) or a graphic
equalizer, etc.
Connect to a first tape deck (Tape deck 1) or a digital compact
cassette deck (DCC), etc.
“220 V —240 V”
according to the area in which the unit will be used.
[Use a minus (-) screwdriver]
Note:
Note that this unit will be seriously damaged if this setting is not
made correctly.
This terminal can be used only with Technics tape deck and com¬
pact disc player which have the appropriate remote control ter¬
minal. (Consult your dealer for details.)
Proper connection with remote control connection cables will
allow control of some functions from this unit’s remote control
transmitter. (See pages 12-13 for details.)
Connect to a tape deck and/or compact disc player as shown
below.
If a tape deck is not being used, the compact disc player can be
connected directly (dotted line).
This unit
Connection cable
for remote control
(included with tape
deck)
Tape deck
(not included)
REMOTE
>CONTROL
OUT
Compact disc
player
(not included)
Connection cable
for remote control
(included with
compact disc
player)
Note:
For a compact disc player with a remote control sensor, the
above connection is not necessary.
| About the cooling fan
There is no cooling fan for some countries.
The cooling fan operates at high power output levels only.

Technics SU-A900 Specifications

General

Brand	Technics
Model	SU-A900
Category	Amplifier
Language	English