Techno Line WT 496 User Manual

EN. 5
2. Then press and hold SET/ ALM, the hour digits flash. Press 6:00 and
appear.
3. Once the alarm is selected, then press and hold SET/ ALM until the
hour digit flash. Then press or to set the alarm in hours. Press
and hold or to accelerate setting in fast speed.
4. Press SET/ ALM once again, the minute digits flash. Then press or
to set the alarm in minutes. Press and hold or to accelerate
setting at high speed.
5. Press SET/ ALM once again, “1-7” flash, press or to select “1-
5” or “6-7” or “1-1”.
1-7 = Monday to Sunday only (Daily)
1-5 = Monday to Friday only (Weekdays)
6-7 = Saturday and Sunday only (Weekends)
1-1 = one time one day alarm only (special day alarm)
6. Press SET/ ALM once again, “HI” flash, press or to select “HI”
or “LO” alarm sound.
HI = Hi / loud alarm sound
LO = Low / soft alarm sound
7. Press SET/ ALM once again or if no key pressed for approx. 10
seconds to exit the setting of the corresponding alarm.

Techno Line WT 496 Specifications

General

Brand	Techno Line
Model	WT 496
Category	Alarm Clock
Language	English