Technoline DCF-77 User Manual

TIME ZONE SETTING:
flashing
The time zone default of the Weather station is "0 hour". To change to another time zone:
1. Press and hold the SET key for about 3 seconds to enter the time zone setting
(flashing).
2. Using the + key, set the time zone. The range runs between 12 to -12 hr, in
consecutive 1hour intervals.
3. Press the SET key to confirm and enter the “Manual Time Setting” or exit the
setting mode by pressing the MIN/MAX key
MANUAL TIME SETTING
In case the Weather Station is not able to detect the Atomic time (DCF) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then
work as a normal Quartz clock.
14

Technoline DCF-77 Specifications

General

Brand	Technoline
Model	DCF-77
Category	Alarm Clock
Language	English