EasyManuals Logo
Home>Technoline>Clock>WS-8118

Technoline WS-8118 User Manual

Technoline WS-8118
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
22
the contacts and force a false reset. Should this happen accidentally then reset all units (see
Setting up above) otherwise transmission problems may occur.
The maximum transmission range is 100 meters from the outdoor temperature transmitter to the
moonphase wall clock (in open space). However, this depends on the surrounding environment
and interference levels. If no reception is possible despite the observation of these factors, all
system units have to be reset (see Setting up).
CHANGING THE DISPLAY MODE (DATE, SECONDS, AND TEMPERATURES)
There are four possible display modes to view the day, seconds, and temperatures.
The indoor temperature/outdoor temperature/date/weekday is the default.
To change the display:
1. Press the + key. The display should now show the seconds/outdoor
temperature/date/weekday.
2. Press the + key a second time and the display will now show the indoor
temperature/seconds/ date/weekday.
3. Press the + key third time and the display will now show the indoor temperature/outdoor
temperature/date/seconds.
4. Press the + key a fourth time and the display will return to the normal display of indoor
temperature/outdoor temperature/date/weekday.
POSITIONING
Before permanently mounting ensure that the Moonphase wall clock is able to receive DCF
signals from the desired location. Also, extreme and sudden changes in temperature will
decrease the accuracy of the weather wall clock.
To achieve a true temperature reading, avoid mounting where direct sunlight can reach the
outdoor temperature transmitter. It is recommended to mount the outdoor temperature
transmitter on a North-facing wall or in any well shaded area. The maximum transmitting range is
100 meters obstacles such as walls, concrete, and large metal objects can reduce the range.
Place both units in their desired location, and wait approximately 10 minutes before permanently
mounting to ensure that there is proper reception. The outdoor temperature transmitter is not
waterproof and should not be placed anywhere it will become submerged in water or be directly
in the rain.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technoline WS-8118 and is the answer not in the manual?

Technoline WS-8118 Specifications

General IconGeneral
BrandTechnoline
ModelWS-8118
CategoryClock
LanguageEnglish

Related product manuals