WS9132 Manual
barometric pressure data according to the local relative air
pressure.
If not changed, the value corresponds to the absolute air pressure.
Press the “ ” button to confirm your setting, the weather
forecast pattern starts to flash. Now use “+” and “-” buttons to set
the weather forecast pattern according to the current weather..
Press the “ ” button to confirm your setting and to end the
setting procedures, the display will return to the normal mode.
Please note:
If there is no valid operation within 20 seconds, the station will
automatically return to normal time mode from the set mode.
Setting the alarm:
Press “ ” button once, LCD displays the “ ” icon, the alarm
function is ON. Then press “ ” button once, the “ ” icon will
disappears from the display, the alarm function is OFF.
Press once “ ” button, LCD display alarm time, then press and
hold “ ” button for 3 seconds until the hour of alarm time starts
to flash. Use the “+” and “-” buttons to set the hour.
Press “ ” button to confirm your setting. The minute of the alarm
time starts to flash. Use the “+” and “-” buttons to set the minute.
Press “ ” button to confirm your setting. The snooze time starts
to flash. Use the “+” and “-” buttons to set the snooze time. The
snooze time can be set from OFF to 60 minutes.
Press “ ” button to confirm your setting and to end the setting
procedure.
To Next Page
Loading...
Need help?
General
