WT2500 User Manual
circumstances, place the unit close to the window.
Clock Mode:
` At Clock Mode, press ”MODE” key to toggle the display among Clock/ Weeks Display/ Alarm1/ Alarm2.
Clock setting:
` At Clock Mode, Press and hold the ”MODE” key more than 2 seconds to set Year Æ D/M or M/D Æ Month Æ
Date Æ Offset Time Æ12/24HR ÆHour Æ Minute Æ°C/°F.
` Corresponding icon flash, then press ”+” or ”-” key to set the value; and hold ”+” or ”-” key for fast
increasing or decreasing.
` Press ”MODE” key to confirm the setting and come to next setting, unit will return to Clock Mode after setting
finish.
F. Y. I . :
` The seconds are set to “0” when change minute value during setting.
Alarm Setting:
` When display Alarm1 or Alarm2, press ”-” key to enable or disable corresponding alarm.
` When display Alarm1 or Alarm2 time, Press and hold ”MODE” key more than 2 seconds to set Alarm Hour &
Minute, corresponding icon flash, then press ”+” or ”-” key to set the value; And hold ”+” or ”-” key for fast
increasing or decreasing.
` Alarm sound crescendo for 2 minutes.
` During alarm, only press ”SNOOZE/LIGHT” key to enable snooze function , ”
” icons will flash , the unit
will alarm 5 minutes later. If press other keys, alarm will stop the alarm immediately.
Month Display:
` At clock mode, press ”+” or “DOWN” key to look through month forward or backward . “Year / Month / Date”
icons will flash accordingly; and press and hold ”+” or ”-” key for fast increasing or decreasing.
` Unit will return to clock mode if without key operation more than 1 minute or press ”MODE” key to exit look
through status and return to clock mode.
Weeks Display:
` At clock mode, press ”MODE” key once to enter weeks look through mode, “Weeks” icon will flash at this
mode. Press ”+” or ”-” key to look through weeks forward or backward; And press and hold ”+” or ”-” key for
fast increasing or decreasing.
` Unit will return to clock mode if without key operation more than 1 minute, or press ”MODE” key to exit look
through status and return to clock mode.
F. Y. I . :
` Comply with ISO 8601:2000, Monday is the first day of the week, and Sunday is the last day. The week
include Jan 4 is the first week of the year.
` Current date only can be changed on clock setting mode.
To Next Page
Loading...
Need help?
General
