15
2.3 Data Line
Connect the data line when the phone is turned off. The charging icon is
displayed on the screen, which indicates that the phone is off and being
charged.
Connect the data line when the phone is turned on. Message is displayed on
the screen.
- Charger connected: use the charging function only. The phone returns to
standby, and the other functions are still available.
2.4 Power on/off the phone
Press and hold the End Key to turn the phone on or off.
If the phone is turned on without a SIM card, the message of “inserting the
SIM card” will be shown. The SIM card will be checked out after being inserted.
Then the following information will be shown on the screen: Enter PIN1 (if you
have set a password for the SIM card), Enter password of the mobile phone (if
you have set a password for unlocking the phone).
After the SIM card is decoded successfully, your phone will search for an
available network (displayed on the screen). Once the connection is made, the
icon of the network supplier will appear in the center of the screen. Now the
phone is in standby and ready to use.
*Note: if “Emergency number” appears, it means you are out of the service area
of the network. However, you can still make emergency calls according to the
signal strength of your phone.
To Next Page
Loading...
Need help?
General
