17
ENGLISH
16
between the digits on the clock to indicate
that the oven controls are blocked.
If the child safety function is activated when
the oven is off (function selection control to
), then the oven cannot be turned on. If this
safety function is activated while another func-
tion is in progress, then the controls on the
electronic clock are blocked.
To deactivate the child safety function, touch
symbols , and on the glass at the
same time again. A beep is heard to confirm
deactivation.
The Synchro mobil system makes it easier to
remove all the trays or racks in use from the
oven in order to handle the contents while coo-
king is in progress or to remove the contents
from the oven when the cooking process is com-
plete. This accessory is easy to dismantle and
helps keep the inside of the oven clean.
Use of the Synchro mobil
1 Open the oven door.
2 Insert or extract the oven trays as on a con-
ventional oven.
3 If you wish to extract the Synchro mobil, press
lever A. The Synchro mobil comes out of the
oven.
4 Insert or extract the trays or check how the
cooking process is going.
5 Finally, insert the Synchro mobil inside the
oven until it reaches its fitted position.
Dismantling the Synchro mobil
1 Open the oven door.
2 Press lever A. The Synchro mobil comes out
of the oven
3 Extract it to its limit and lift the front. It can
now be removed from the side guides.
4 It is now easy to clean the inside of the oven.
To reassemble the Synchro mobil, follow the ins-
tructions indicated above in reverse order
making sure that the Synchro mobil slides freely
on the side guides inside the oven.
Setting an end-of-cooking time
1 Touch symbol on the glass until the indi-
cator light above the symbol starts flashing.
2 Set the specific time you want the cooking
process to end at by touching the + sym-
bol on the glass.
3 Two beeps are then heard and the flashing
indicator light comes on permanently to
indicate that the oven is set to turn itself
off automatically.
4 The clock shows the real time again.
5 Choose a temperature and a cooking func-
tion.
6 To modify the set time, touch symbol
and then touch the + and – symbols on the
glass. Two beeps are heard to confirm the
new setting and the real time appears on
the clock again.
7 When the end-of-cooking time is reached,
the oven turns itself off, the alarm sounds
and the indicator light starts flashing.
8 To turn the oven off, set the controls to .
9 Touch any symbol on the glass to cancel
the alarm.
NOTE
Touch symbol to display the end-of-cooking
time that has been set.
Setting a cooking time and an end-of-cooking
time
1 Set the cooking time (length of time).
2 Set the end-of-cooking time.
3 Choose a temperature and a cooking func-
tion.
4 The oven remains off and the indicator
lights above symbols and light up.
The oven is set for a cooking time and an
end-of-cooking time.
5 When the time to start cooking is reached,
the oven turns itself on and cooks for the
period of time set as the cooking time.
6 When the set end-of-cooking time is reached,
the oven turns itself off, the alarm sounds
and the indicator lights above symbols
and start flashing.
7 To turn the oven off, set the controls to .
8 Touch any symbol on the glass to cancel the
alarm.
Setting the alarm
1 Touch symbol on the glass until the indi-
cator light above the symbol starts flashing.
2 Set the period of time at the end of which
you want the alarm to sound by touching
symbol + on the glass.
3 Two beeps are then heard and the indicator
light comes on permanently to indicate that
the alarm is set.
4 To modify the set time, touch symbol on
the glass and then touch symbols + and – .
Two beeps are heard to confirm the new set-
ting, and the real time appears on the clock
again.
5 When the period of time set for the alarm
comes to an end, the alarm sounds and the
indicator light starts flashing.
6 Touch any symbol on the glass to cancel the
alarm.
NOTE
If symbol is touched for more than two seconds,
the time remaining before the alarm is set to
sound is displayed, and the indicator light flashes.
IMPORTANT
A setting can be cancelled by touching symbols
+ and – on the glass and the relevant function
at the same time.
In the event of a mains electricity supply failure,
all the settings on the electronic clock are delet-
ed and “00.00” flashes on the clock display. It
is necessary to set the time and the cooking
function again.
Child safety function
The oven controls and settings can be blocked
to prevent small children from interfering with
them. To block the controls, touch symbols ,
and on the glass at the same time.
A beep is heard and flashing dots appear
A
SYNCHRO MOBIL
To Next Page
Loading...
Need help?
General
