Teka HRB Series User Manual

17
User’s Guide
English
Description of the electronic clock/timer
Using your oven
1. LED light function - START
2. LED light function - STOP
3. LED light function - TIMER
4. LED light function - TIME
5. Clock control button
CONNECTION TO THE MAINS
ELECTRICITY
On connecting the oven to the mains electrical
power for the rst time, or after a power cut,
the LED
(4) ashes constantly. The oven
will not function in this mode.
The clock operation is controlled with the
clock control button
(5).
This control has the following functions:
• Press it consecutively to scroll through
the functions in clockwise direction.
• Press it to conrm the selected function.
• Turn it left or right to select cooking
start times, cooking end times and to
programme the alarm.
• Hold it down to change the clock
operation to manual.
Hold down the control button
(5) for 3
seconds until the LED
(4) goes out, and
the stand-by mode is activated.
SETTING THE TIME
Press the control button (5) several times
until the LED ashes
(4), then turn the
control button
(5) until the hands of the
clock are at the required time.
The time can only be set if there are no alarms
or cooking functions programmed.
After adjusting the time on the clock, press the
control button
(5), to conrm the selection.

Teka HRB Series Specifications

General

Brand	Teka
Model	HRB Series
Category	Oven
Language	English