DMM912/914/9161–18
Input connectors
_C V W . Input connector for volts, ohms, frequency,
continuity, temperature, capacitance, and diode measure-
ments.
COM. Common connector (ground reference). All mea-
surements are referenced to this connector.
WARNING. To avoid personal injury and product
damage, do not exceed more than a 1000 VDC
potential between the _C V
input or
between the COM connector or between earth
ground and these connectors.
Maximum open circuit voltage for the A mA
and A connectors is 600 V.
To Next Page
Loading...
Need help?
General
