DMM912/914/916 1–11
HOLD. This button toggles the hold mode on and off.
With hold on, the instrument beeps, freezes the display,
and displays the
indicator.
RANGE. This button selects the manual ranging mode and
then selects the range. The indicator turns off.
Press and hold the RANGE button for two seconds to
return the multimeter to auto-range mode (or turn the
dial).
M/M/A. This button scrolls through the MIN, MAX, MAX
– MIN, and AVG functions. Elapsed time from beginning
of test to the latest event appears in the upper display.
Events must be stable for 100 ms. The warning beeper
signals if the function is not applicable. Refer to page
1–34 for more details about these functions.
NOTE. You may want to adjust the auto power off
time limit. Refer to page 1–32 about auto power
off.
To Next Page
Loading...
Need help?
General
