DMM912/914/916 1–13
/ %. Push to enter the delta display mode, displaying the
difference (delta) between the measured value and a
reference value. The reference value is set when entering
Delta mode or using the Setup function. The difference is
displayed in the measurement units or as a percent
(selected by repeating the / % button press).
AUTO H. Hold mode is activated when a stable reading is
first achieved.
DIGITS. Push to toggle the display count between 40,000
and 4,000. The low count provides a faster response.
PEAK H . Peak hold operates similar to M/M/A except that
events as fast as 1 ms are captured and average values are
not available. The
indicator appears in the display.
Peak hold disables the bargraph. Peak hold operates for
DC volts.
To Next Page
Loading...
Need help?
General
