Tektronix DPO2000 Series User Manual

Analyze Waveform Data
3. Turn multipurpose knob a to select the
specific measurement. If needed, then
turn multipurpose knob b to select the
channel to measure on. Then push OK Add
Measurement.
4. To remove a measurement, push Remove
Measurement. Then push the side-bezel menu
for the measurement you w ant to remove,
or Remove All.ThenpushOK Remove
Measurement.
Quick Tips
To remove all measurements, select Remov e All Measurements.
A symbol appears instead of the expected numerical measuremen t if a vertical clipping condition exists. Part of the
waveform is a bove or below the display. To obtain a proper numerical measureme nt, turn the vertical scale and position
knobs to make all of th e waveform appear in the display.
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 173

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English