Analyze Waveform Data
3. Use the side-b ezel menu and the multipurpose
knobs to adjust the vertical and horizontal
settings of the reference waveform.
R1
Vertical
0.00 div
100 mV/div
Horizontal
0.00 s
4.00 μs/div
Quick Tips
Selecting and Displaying Reference Waveforms. You can display all the reference waveforms at the s ame time. Push the
appropriate scree n button to select a particular reference wavefo rm.
Removing Reference Waveforms from the Display. To remove a reference waveform from the display, push the front-panel R
button t o access the lower-bezel menu. Then push the associated button from the lower-bezel menu to turn it off.
Scaling and Positioning a Reference Waveform. You can position and scale a reference waveform independently from a ll
other displayed waveforms. Select the reference waveform and then adjust it with a multipurpose knob. You can do this
whether acquisition is running or not.
If a reference waveform is selected, scaling and repositioning of the reference waveform operates the same way whether zoom
is turned on or off.
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 197
To Next Page
Loading...
Need help?
General
