Tektronix DPO2014 Programmer's Manual

Commands Listed in Alphabetical Order
FACtory (No Qu
ery Form)
Resets the oscilloscope to its factory default settings.
This command does the following:
Clears the Event Status Enable Register
Clears the Service Request Enable Register
Sets the De
vice Event Status Enable Register to 255
Purges all defined aliases
Enables all Command Headers
Sets the macro definedby*DDTtoa"zero-lengthfield"
Clears the pending operation flag and associated operations
This command does not reset the following:
Commun
ication s ettings
Sate of the VXI-11 (Ethernet IEEE Std 488.2) interface.
Calibration data that affects device specifications
Protected user data
Stored settings
Power On Status Clear Flag
Osc
illoscope password
Group
Save and Recall
Syntax
FACtory
R
elated Commands
*PSC, *RCL, RECAll:SETUp, *RST, *SAV, SAVe:SETUp
Arguments
None
Examples
FACTORY resets the oscilloscope to its factory default settings.
2-154 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2014 Specifications

General

Brand	Tektronix
Model	DPO2014
Category	Test Equipment
Language	English