Commands Listed in Alphabetical Order
PICTBridge:P
RINTQual
Sets or returns the output print quality.
Group
PictBridge
Syntax
PICTBridge:PRINTQual {DEFLT|NRMAL|F INE|DRAFT}
Arguments
DEFLT for the default quality print.
NRMAL for a normal quality print.
FINE for a fine quality print.
DRAFT for a draft quality print.
Examples
PICTBRIDGE:PRINTQUAL? might return PICTBRIDGE:PRINTQUAL DEFLT
indicating that the default quality print.
PICTBRIDGE:PRINTQUAL FINE sets the print quality to Fine.
*PSC
Sets or returns the power-on status flag that controls the automatic power-on
handling of the DESER, SRER, and ESER registers. When *PSC is true, the
DESER register is set to 255 and the SRER and ESER registers are set to 0 at
power-on. When *PSC is false, the current values in the DESER, SRER, and
ESER registers are preserved in nonvolatile memory when power is shut off and
are restored at power-on.
Group
Status and Error
Syntax
*PSC {O FF|ON|NR1>}
*PSC?
Related Commands
DESE, *ESE, FACtory, *RST, *SRE
Arguments
OFF sets the power-on status clear flag to false.
ON sets the power-on status cle ar flag to true.
<NR1> = 0 sets the power-on status clear flag to false. This disables the power-on
clear allowing the oscilloscope to possibly assert SRQ after power-on; a ny other
2-226 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
