Commands Listed in Alphabetical Order
“V”;YMULT 4.00
00E-3;YOFF 0.0000;YZERO 0.0000;:CURVE
2,1,4,2,4,3,0,3,3,3,3,3,3, 4,3,5,6,6,7,3
WFMInpre? (Query Only)
Returns the waveform formatting and scaling specifications to be applied to the
next incoming CURVe command data.
Group
Waveform Transfer
Syntax
WFMInpre?
Related Commands
WFMOutpre?
Examples
WFMINPRE? might return the waveform formatting as :WFMINPRE:BIT_N R
8;BN_FMT RI;BYT_NR 1; BYT_OR MSB;ENCDG B IN;NR_PT 500;PT_FMT
Y; PT_O FF 0;XINCR 2.0000E-6;XZERO 1.7536E-6; XUNIT "s";YMULT
1.0000E-3;YOFF 0.0000; YZERO 0.0000;YUNIT "V"
WFMInpre:BIT_Nr
Sets or returns the number of bits per binary waveform point for the incoming
waveform. Changing the value of WFMInpre:BIT_Nr also changes the value of
WFMInpre:BYT_Nr.
Group
Waveform Transfer
Syntax
WFMInpre:BIT_Nr <NR1>
WFMInpre:BIT_Nr?
Related Commands
WFMInpre:BYT_Nr
Arguments
<NR1> number of bits per data point can be 8 or 16.
Examples
WFMINPRE:BIT_NR 16 sets the number of bits per waveform point to 16, for
incoming data.
WFMINPRE:BIT_NR? might return :WFMIN PRE:BIT_NR 8 indicating that
incoming waveform data uses 8 bits per waveform point.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-353
To Next Page
Loading...
Need help?
General
