Tektronix DPO2014 Programmer's Manual

Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A:SETHold:DATa?
Returns the voltage
threshold and data source
for the setup/hold trigger
TRIGger:A:SETHold:DATa:SOUrce Sets or returns the data
source for the setup and hold
trigger
TRIGger:A:SETHold:DATa:THReshold Sets or returns the data
voltage threshold for setup
and hold trigger
TRIGger:A:SETHo ld:H OLDTime Sets or returns the hold
time for the setup and hold
violation triggering
TRIGger:A:SETHold:SETTime Sets or returns the setup
time for setup and hold
violation triggering
TRIGger:A:SETHold:THReshold:CH<x> Sets or queries the threshold
for the channel
TRIGger:A:UPPerthreshold:CH<x> Sets the upper threshold for
the channel selected
TRIGger:A{:TRANsition|:RISEFall}?
Returns the delta time,
polarity, and both upper and
lower threshold limits for the
transition time trigger
TRIGger:A{:TRANsition|:RISEFall}:DELTatime Sets or returns the delta
time used in calculating the
transition value
TRIGger:A{:TRANsition|:RISEFall}:POLarity Sets or returns the polarity
for the A pulse transition
trigger
TRIGger:A{:TRANsition|:RISEFall}:SOUrce Sets or returns the source
for transition trigger
TRIGger:A{:TRANsition|:RISEFall}:WHEn Sets or returns the
relationship of delta time
to transitioning signal
TRIGger:A:TYPe Sets or returns the type of A
trigger
TRIGger:A:VIDeo?
Returns the video
parameters for the A trigger
TRIGger:A:VIDeo:HOLD off:FIELD Sets or returns the video
trigger holdoff
TRIGger:A:VIDeo:LINE Sets or returns the video
line number on which the
oscilloscope triggers
2-46 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2014 Specifications

General

Brand	Tektronix
Model	DPO2014
Category	Test Equipment
Language	English