Clear and Sanitize a Non-Functional Instrument
If your instrument is not functioning and you need to clear or sanitize it, proceed
as follows:
Acquisition
board
Only qualified personnel should perform service procedures. Read the Service
Safety Summary and the General Safety Summary in the DPO2000 and MSO2000
Series Digital Phosphor and Mixed Signal Oscilloscopes Service Manual before
performin
g any service procedures.
Remove the Acquisition board and return the product to Tektronix. A n ew
Acquisit
ion board will be installed, and t he instrument will be repaired and
adjusted as necessary.
For remo
val instructions, refer to the DPO2000 and MSO2000 series service
manual, part number 071-2331-XX, available on the Tektronix Web site at
www.tektronix.com/manuals.
After removal of the Acquisition board, refer to your company’s internal policies
regarding handling or disposal of the board.
USB Flash Drive
Remov
etheUSBflash drive and return the instrument to Tektronix for repair.
After removal of the USB fl ash drive, refer to your company’s internal policies
rega
rding handling or disposal of the flash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at
the time of replacement.
DPO2000 and MSO2000 Series Declassification and Security Instructions 9
To Previous Page
Loading...
Need help?
General
